LPGTECH EmuTECH 02 Fuel Level Emulator

LPGTECH EmuTECH Pb-Level-02 Petrol level indicator emulator

When driving on LPG gas dashboard car gauge may give improper fuel level readings as car ECU thinks that petrol is being consumed when it is not. To prevent fake falling down of petrol level emulator EmuTECH Pb-Level-02 is used to tell car ECU what is real petrol level after every engine start.

EmuTECH Pb-Level-02 ensures proper petrol level indication in ALL LPG/CNG converted vehicles!

Features:

• New version of the EmuTECH Pb-Level emulator
• Microprocessor based construction provides compatibility with all vehicle makes
• Suitable for vehicles where fuel level is calulated by onboard computer
• Ensures proper petrol level indication after every engine start
• Small, compact, composite case for easier installation
• Easy connection (a small number of wires)
• No tuning and calibration process required

Connection instruction:

1. Determine and cut fuel level signal wire (Voltage vary depends on the fuel level position in petrol tank)
2. Connect Green wire of emulator to ECU side of the Level Signal Wire
3. Connect Yellow wire of emulator to Fuel Pump Tank side
4. IMPORTANT! Connect Brown wire of emulator to Ground of Fuel (Petrol) Level Sensor
5. Connect Orange wire of emulator to Fuel pump positive
6. Connect Red emulator wire to Batter (+) and Black emulator wire to Batter (-)

Connection diagram: