Valves & manifolds

Brass Gas Manifold Distribution Block 3 Way  Gas manifold to use with vapour gas. It should be connected after the regulator using 8mm copper pipe / 8mm polypipe. There are 3 quarter turn taps to open and close valves to individual gas appliances...

Brass Gas Manifold Distribution Block 2 Way Gas manifold to use with vapour gas. It should be connected after the regulator using 8mm copper pipe / 8mm polypipe. There are 2 quarter turn taps to open and close valves to individual gas appliances. The...

Gas Manifold Distribution Block 1 way Brass  Gas valve to use with vapour gas. It should be connected after the regulator using 8mm copper pipe / 8mm polypipe. There are 2 quarter turn taps to open and close valves to individual gas appliances. The...

Gas Manifold Distribution Block 2 way Gas manifold to use with low pressure vapour gas. It should be connected after the regulator using 8mm copper pipe.  The inlet and outlets are 8mm compression fittings. There are 2 quarter turn taps to open...

Gas Manifold Distribution Block 4 way Gas manifold to use with low pressure vapour gas. It should be connected after the regulator using 8mm copper pipe.  The inlet and outlets are 8mm compression fittings. There are 4 quarter turn taps to open...

Gas Manifold Distribution Block 3 way Gas manifold to use with low pressure vapour gas. It should be connected after the regulator using 8mm copper pipe.  The inlet and outlets are 8mm compression fittings. There are 3 quarter turn taps to open...

8mm Orange Gas Hose Connector for Manifold Distributors with Clamp Nipple for gas manifolds, one side is designed to take 8mm orange hose, the other 8mm compression olive. Comes with wormdrive clamp.

8mm Orange Gas Hose Connector for Manifold Distribution Blocks Nipple for gas manifolds, one side is designed to take 8mm orange hose, the other 8mm compression olive.

Inline Gas Valve 8mm Compression Low Pressure Small gas valve with quarter turn knob. Two holes for countersink mounting screws. The compression fitting takes standard 8mm pipe. The nut thread is 1/4". Designed for low pressure gas - after regulator...

Gas Manifold Distribution Block 1 way Brass  Gas valve to use with vapour gas. It should be connected after the regulator using 8mm copper pipe / 8mm polypipe. There are 2 quarter turn taps to open and close valves to individual gas appliances. The...

8mm Blanking Plug Olive for Manifold Tap Distributor 8mm blanking olive for manifolds

Manual Valve DIN 21.8 Left for 4-Hole Vapour Tanks Valve for 4 Hole red vapour tanks with manual tap. The outlet is W21.8 left thread to use with pigtails equipped with rubber seal.

Gas Manifold Distribution Block 2 way Brass Gas manifold to use with vapour gas. It should be connected after the regulator using 8mm copper pipe / 8mm polypipe. There are 2 quarter turn taps to open and close valves to individual gas appliances. The...

Manual Gas Valve High Pressure 1/4"   Manual gas valve to use with high pressure gas, the connections are G1/4" on both ends. Perfect for cutting gas off in camper vans. 

G5/8" POL LH outlet with 25E thread inlet and 26 bar safety valve - Cavagna LPG gas cylinder handwheel valve    Handwheel valve dedicated for composite, aluminium, steel gas cylinders, bottles with UK Calor type outlet thread G5/8"...

Gas Manifold Distribution Block 3 way brass  Gas manifold to use with vapour gas. It should be connected after the regulator using 8mm copper pipe / 8mm polypipe. There are 3 quarter turn taps to open and close valves to individual gas appliances...