AC STAG R02EL 136HP LPG Reducer Integrated 6mm Valve

AC STAG R02 136HP LPG Reducer Integrated 6mm Valve

The STAG R02 EL single-stage reducer integrated with the solenoid valve and filter is designed for car sequential injection systems. The device reduces pressure of LPG flowing from the tank and turns it into a gas (vaporization). The reducer comes with fittings and M6 2.2k temperature sensor.

Thermal insulation system

The reducer is distinguishable due to its compact size and unique design comprising two aluminum castings and a cover made in the ACtherm system preventing gas cooling, thus providing an excellent thermal insulation. Due to its unique design, the STAG R02 EL heats up very quickly, thus, switching to gas is also performed quickly. Therefore, no additional work of the controller, such as temperature correction, is required. Its high thermal efficiency and resistance to LPG contamination makes the reducer the best choice when selecting autogas system components.

Pressure stabilization system

The STAG R02 EL reducer is equipped with the unique ACPress system that provides constant pressure supplying injector rails when driving in various road conditions. It should be also noted, that stability is guaranteed regardless of inlet pressure of gas delivered from the gas cylinder.

Flexible fastening system

The device is fastened with a single centrally located bolt only, thus, enabling the reducer to be installed practically in any position. The device versatility is complemented with the  TriACflex elbow connector system that can be configured in any arrangement.

Advantages:

• built-in solenoid valve and filter,
• small dimensions,
• compact design,
• easy filter replacement,
• excellent thermal efficiency,
• stable adjustments,
• resistance to LPG contamination,
• pressure stability independent of cylinder inlet pressure,
• low pressure drops at high loads,
• mounted with a single centrally located bolt,
• replaceable elbow connector system.

Standards and approvals: The STAG R02 EL reducer holds the E8 approval No. 67R-01 6865 and meets the requirements of the UN Economic Commission for Europe Regulation No. 67.

Specification