null
top-banner-left.png
banner-top-center2.png
top-banner-right.png
+44 (0) 116 367 0533
Patio Gas

Propane Calor Bottle Regulator 50 mbar

(No reviews yet) Write a Review
SKU:
400214
Weight:
0.40 KGS
Shipping:
Calculated at Checkout
£7.39 Inc. VAT
£6.16 Ex. VAT

Description

Propane Calor Bottle Pressure Regulator 50 mbar

 

Low pressure gas regulator suitable for Propane for use with UK Calor bottles.

 

Specification:

Inlet UK POL Calor type with filter mesh
Spanner size Tool-free hand operated nut
Outlet 8mm Orange hose push-in nozzle
Pressure 50 mbar (suitable for Propane)
Maximum gas flow 1.5kg/h
Length Including nut and nozzle - 15cm
Inlet pressure 1-16 bar
  1. Fitting and operating conditions:
    1. The device is a household regulator designed to supply gas to gas consuming appliances at a pressure and capacity as indicated on the identification label.
    2. The regulator can be fitted at any cylinder equipped with cylinder valve with hand-operated valve. The gas cylinder must always be used in the upright position.
    3. Whenever used outdoors, the regulator must be suitably protected against rain.
    4. Never search for leaks using a flame, use a soapy-water solution instead.
    5. In case of any difficulties or problems, shut off the gas supply and contact us immediately.
  2. Mounting the connection to the gas consuming appliance
    Fit a regulation rubber hose to the hose nozzle (lubricate the nozzle with warm water for easy insertion). To guarantee a leak-free connection put suitable clip on the hose.
  3. Mounting regulator on gas cylinder  
    Make sure that all taps are closed and connecting pipe to the gas appliance is correctly fitted. Tighten the union nut by screwing up in the direction indicated by the arrow. The union nut should be tightened moderately. The joint must be checked for leaks using soapy water solution. Hold the regulator and turn the union nut, the regulator itself should be never rotated.

 

 

View AllClose

0 Reviews

View AllClose