LPG Blog

Please look on very valuable and interesting research on how the location of manifold LPG nozzles influence engine work. [LINK] Results of research prove a significant influence of ferrule location on the engine work fueled by LPG sequential gas. Moving away the area of providing the gas from combustion chamber result in worse parameters values of the engine work. In addition, their sensitivity on φ-angle increase. The further position of installing a ferrule from the inlet va …

There are many different standards for LPG gas cylinders, bottles inlet connection. Please find below most of the standards listed:Pictures comes from GOK gas products catalogue. …

The 10 commandments for a good autogas installation from www.gascontrol.itWRONGCORRECT1DO NOT place the ECU near direct heat sources and far from the possibility of air exchangeAlways place the ECU in a location that can be easily reached by the outside air coming through the radiator, preferably close to the battery, on the outer side of the engine compartment2DO NOT place the control unit with the connector upwards as the condensation would not find a way outPlace the ECU vertically wit …

Set of basic equipment for motorhome, caravan, patio gas, cooking, heating appliances:Vapour Gas Cylinder Tank SetSpecial, red tank with vapour gas outlet (standard autogas tanks have liquid gas output which is not suitable for cooking, heating appliances). Set contains inlet JIC hose connection valve, level sensor with gauge, safety relief valve, and manual output valve with 1/4" thread. Valves are covered with gas tight cover which ventilation holes makes possible to instal the tank inside the …

If you want to get rid petrol tank for some reason or start the engine always on LPG without using a petrol Europegas Avance controllers have this option for you. To set up Europegas Avance ECU to start only on LPG you need: 1. Go to: Options->Preferences and tick "Expert mode" 2. Go to Advanced tab on the panel below and in Emergency start section change Remember start on gas option to ON 3. IMPORTANT! Start the engine pressing …