VALTEK
Calibration Nozzle for Valtek, Matrix Injectors
(No reviews yet)
Write a Review
- SKU:
- 121003
- Weight:
- 0.01 KGS
- Shipping:
- Calculated at Checkout
Description
Nozzle for Valtek, Matrix Injectors - Ø5mm, Short
Short (standard) version of output calibration nozzles for adjusting gas amount in Valtek or Matrix LPG injector rails.
Comes with a 1.5mm diameter nozzles and needs to be drilled to proper size.
Internal hose size to be used with that nozzle is 5mm.
Related Products
Related Products
4CYL Valtek Plug Connector to MATRIX Injectors
MATRIX
15.61€
4CYL Valtek Plug Connector to MATRIX Injectors
allow to get output from 4 Valtek Super Seal 2-pin Connectors (Male) to MATRIX Injectors (Female)
120956
Blank HANA Calibration Injector Nozzle
HANA
0.71€
Blank HANA Calibration Injector Nozzle Calibration nozzle for HANA injectors without hole. Nozzle can be drilled to the desired size
123108
Valtek Type-34 Gas Injector Rail Nozzle 12mm
3.59€
Valtek Type-34 Gas Injector Rail Nozzle 12mm Replacement gas nozzle for Valtek Type-34 injectors rail. The standard nozzle is made of brittle plastic and it tends to crack. This is strong brass...
124004
Calibration Nozzle for Barracuda, Yeti, Supernova Injectors
LPG Shop
1.19€
Calibration Nozzle for Barracuda, Yeti, Supernova Injectors Calibration nozzle for Alex Barracuda, LPG Tech Yeti and Supernova injectors, the diameter is 1.5mm
123113
2.1mm - Two Stripes HANA Injector Calibration Nozzle
HANA
1.19€
2.1mm - One Stripe HANA Injector Calibration Nozzle 20-30HP per cylinder calibrated nozzle for HANA Gold injectors. This nozzle converts HANA Gold to former HANA Black Injector.
121006
2.4mm - One Stripe HANA Injector Calibration Nozzle
HANA
1.19€
2.4mm - One Stripe HANA Injector Calibration Nozzle 26-39HP per cylinder calibrated nozzle for HANA Gold injectors. This nozzle converts HANA Gold to former HANA Red Injector.
121005
1.9mm - Three Stripes HANA Injector Calibration Nozzle
HANA
1.19€
1.9mm - Three Stripes HANA Injector Calibration Nozzle 15-24HP per cylinder calibrated nozzle for HANA Gold injectors. This nozzle converts HANA Gold to former HANA Violet Injector.
121007
Out of stock
Calibration Nozzle for AC STAG W01 W02 W03 Injectors
AC STAG
1.19€
Calibration Nozzle for AC STAG W01 W02 W03 Injector Hose 6mm Calibration nozzle for use with AC STAG W02 and W03 injectors, designed for 6mm gas hose, but it also fit 5mm Parker Hose. It can...
123112
VALTEK 3CYL Rail Type-30 Injectors
VALTEK
48.06€
Injectors VALTEK Type 30 3 cylinders Rail
Supplied with rubber mounts and calibration nozzles (4 pcs.).
Specification:
Piston stroke 0.5mm
Coils
120302